HP Deskjet 2541 AirPrint Setup!
Set up your HP printer on a remote (Wi-Fi) arrange. These means apply to first time associations, new switch or ISP setup, or to reestablish a lost association because of system related issues.
Step 1: Review necessities
- To utilize your HP Deskjet 2541 AirPrint Setup on a remote system, you require the accompanying things.
- A dynamic Wi-Fi system, for example, a home remote system
- A Windows PC associated with a similar system, either through Wi-Fi or an Ethernet link
Step 2: Set up and turn on the printer
- The printer must be fueled on with paper stacked and ink cartridges introduced before setting up the remote association.
- Avoid this progression if your printer equipment has as of now been set up.
- On the off chance that you are setting up another HP Deskjet 2541 AirPrint Setup from the case, evacuate all defensive tape and bundling material from the outside and within the printer.
- Put the printer on a level, level surface, associate the power line to the back of the printer and to an electrical outlet, then turn on the HP Deskjet 2541 AirPrint Setup.
- Open the paper input plate, stack a heap of 10 to 20 sheets of paper, then slide the paper manages internal until they lean against the edges of the paper.
- Expel the new cartridge from its bundling and force the orange tab to evacuate the defensive tape, open the cartridge get to entryway, then introduce the ink cartridges into their individual openings.
- Close the cartridge get to entryway and sit tight for an arrangement page to print.
- Put the arrangement page with the print side down on the right-front corner of the scanner glass, then press the Start Copy Black button to adjust the cartridges.
On the off chance that you experience difficulty setting up the equipment, allude to the setup blurb in the container or go to HP Deskjet 1510 and 2540 Printers – Setting Up the Printer Hardware.
Your HP Deskjet 2541 AirPrint Setup equipment is currently set up and arranged for the remote setup.
Step 3: Start the product establishment
- On the PC you need to print from, begin the HP full element print driver and programming establishment. It contains the remote print drivers and also HP Printer Assistant programming for examining and other printer administration capacities.
- Utilize one of the accompanying alternatives to begin the product establishment:
- In the event that you have an establishment plate that backings the Windows form on your PC, embed it into the PC circle drive and take after the means to start the establishment.
- Go to 123.hp.com/DJ2540 and click Download. The full element establishment prepare starts naturally after the product downloads.
- The product establishment window advances until a Connect window opens. STOP at the Connect window! Try not to snap Continue now.
Step 4: Restore default remote settings on the printer
- Press a progression of catches on the HP Deskjet 2541 AirPrint Setup to reset the remote settings to guarantee that the association finishes effectively.
- Ensure the printer is turned on.
- In the event that the remote light is flickering, skip to the following stride to keep introducing the product.
- Press and hold the printer control button .
- While holding down the power catch, press the Start Copy Black button two times, then press the scratch off button three times.
- Discharge the power catch. The remote light alongside the remote catch ought to flicker. Rehash these means if the remote light does not flicker.
- Instantly proceed to the following stride to introduce the product. You have around 20 minutes to finish the product setup utilizing HP’s auto remote associate component.
Step 5: Continue the product establishment
- Introduce the product to get done with setting up your HP HP Deskjet 2541 AirPrint Setup and interface it to your remote system.
- Come back to the HP establishment Connect screen on your PC, and click Continue.
- Perused and react to every product establishment screen until a Connection Options screen opens.
- Ensure the power catch light on the printer is completely lit and the remote light is squinting. On the off chance that the power catch light is diminish (showing power spare mode), squeeze it once until it turns out to be splendid.
- On the Connection Options screen, select Wireless – make a remote association with the HP Deskjet 2541 AirPrint Setup, then click Next.
- After the establishment checks your system design, one of the accompanying screens show to furnish you with the best accessible technique to finish the remote setup.
- HP Auto Wireless Connect: Network check naturally accumulates your system association data. Click Yes, then click Next.
- Remote Setup Using a USB Connection: Network check couldn’t accumulate your system settings. Interface a USB link from your PC to the printer and click Next. The USB association is just impermanent and you are incited to detach the USB link after the setup finishes.
- Perused and react to each of the setup screens until an Activate window opens. Your printer is set up and you can now print or output.
- If you need to utilize your HP Deskjet 2541 AirPrint Setup now, you are finished. Tap the nearby catch in the upper right corner of the window.
- On the off chance that you need to proceed with online to enlist for a HP Connected record, click Continue Online.
On the off chance that you proceed with online to make a record with HP Connected, don’t endeavor to include your printer or enter a HP Deskjet 2541 AirPrint Setup assert code. Your printer does not bolster electronic printing administrations. Close these site pages in the wake of agreeing to accept HP Connected.
If you need further more clarification about the HP Deskjet 2541 Airprint setup contact our experts @ +1-855-567-1900 to resolve your issues regarding HP Deskjet Printers.